Home | Computer | Hardware
Previously in fabrication facilities we have seen the substitute of the old paper based notice board that you will have witnessed on the factory floor, now they are utilizing dynamic signs to fill in workers and customers alike with company news. Now it seems that this hardware is generating a buzz and the notice board is being changed by dynamic signage, many firms who have a manufacturing facility are selecting to get rid of the ancient notice board and put up Flat screen screens, these are then wired on the same computer infrastructure that the computers run off. The digital media is added by the IT section and it can hastily be changed, for instance if a visiting celebrity sends a replacement because they are sick, inside 25 seconds the message on the welcome sign is amended to the new name and it indicates the company is on the ball. This is fine in public areas, nonetheless when a patron visits and you want to give them a walk round in the plant, so they can see the newest manufacturing practices, this is an ideal chance in implementing your service brand right now on your visitor, as soon as they notice the gigantic screens in the factory areas they will definitely be astounded, it also displays that the corporation invests in new technology and is ahead of the game. But there is one issue even commercial screens are not designed to be utilized in areas were injurious air borne contaminants are, most producers have some type of corrosive component in the air, from acids to glass particles if these get into the back of the display it is only a matter of time until the monitor fails. The cure - is to put the monitor in a ruggedized LCD enclosure, these gives IP65 fortification, so they can even be washed down with high pressure water jets, just right for any food processing company. Each housing has it's own cooling and heating system depending on the application, providing a micro climate within the LCD case. The Flat screen case are deployed with a complicated cooling system that also incorporates a filtration component, that filters all tiny air borne particles out, so the air entering the unit is fresh, cool air. Then the display inside the protective housing can be deployed to gantries or ceiling mounted using a heavy duty fasteners. Fitting electronic signage in a plant is no longer out of the ordinary, but also goes well in the field of plant data systems, this is when standard computer systems are deployed on a manufacturing plant floor to gather important information about the present orders being produced. But what is considered necessary for protecting factory data systems? Well almost all the equipment will demand safeguarding from dust and fluid and the normal hazards that would render any workstation useless. The hardware needing protecting extend from the large HP networked printers to the computer, display and even the keyboard. Depending on the goods made in the factory will depend upon the protection needed, if the area is washdown the solution will have to be a waterproof solution to IP65 or a dust proof solution to IP54. Then there is the computer enclosure to reflect on, do you want to have all the hardware in one protective housing? If so, the all-in-one unit is perfect, this will care for the printer, PC, keyboard and screen in one unit. Now an Plasma casing is as common place on a plant floor as is a PC enclosure, due to the peril element of using electronics in a hostile environment.
Article Source: http://www.gambling-articles.org
Max owns the leading manufacturer of PC enclosure for factory information system protection, as well as manufacturing a range of LCD enclosure for outdoor digital signage protection.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
