How to Tie a Tie and Different Tie Knots

Tying a tie can seem like magic at first, but once you learn how to tie a tie, you'll never forget. A neck tie says alot about a man, commands respect, and can also set others at ease. The color, texture, design, and knot all speak volumes about the man wearing the tie. It is just as important to learn how to properly tie a tie as it is to pick colors and designs that meet your personal style. Please feel free to click on the links above to find out how to tie a Windsor neck tie, how to tie a four in hand knot, how to tie a half windsor neck tie, and how to knot a bow tie. Enjoy.

Note: To follow directions with images please go to: eagleswings(dot)com/windsor.asp

How to tie a Windsor Knot

1. Situate the tie so that the end "A" is longer than end "B" and cross "A" over "B".

2. Bring "A" up through loop between collar and tie; then back down.

3. Pull "A" underneath "B" and to the left, and back through the loop again.

4. Bring "A" across the front from left to right.

5. Pull "A" up through the loop again.

6. Bring "A" down through the knot in front.

7. Using both hands, tighten the knot and draw up to collar.

To follow directions with images please go to: eagleswings(dot)com/windsor.asp

How to tie a Half Windsor

1. Situate the tie so that the end "A" is longer than end "B" and cross "A" over "B".

2. Bring "A" up around and behind "B".

3. Bring "A" up.

4. Pull "A" up and through the loop

5. Bring "A" around front, over "B" from left to right.

6. Again, bring "A" up and through the loop.

7. Bring "A" down through the knot in front.

8. Using both hands, tighten the knot and draw up to collar.

How to tie a Four in Hand

1. Situate the tie so that the end "A" is longer than end "B" and cross "A" over "B".

2. Turn "A" back underneath "B".

3. Continue by bringing "A" back over in front of "B" again.

4. Pull "A" up and through the loop around your neck.

5. Hold the front of the knot loosely with your index finger and bring "A" down through front loop.

6. Remove finger and tighten knot snugly to collar by holding "B" and sliding the knot.

How to knot a bow tie

1. Place the bow tie around your neck, situating it so that end "A" is longer than end "B".

2. Cross "A" over "B".

3. Bring "A" up and under the loop

4. Now double "B" over itself to form the front base loop of the tie.

5. Loop "A" over the center of the loop you just formed.

6. Holding everything in place, double "A" back on itself and poke it through the loop behind the tie.

7. Adjust the tie by tugging at the ends of it and straightening the center knot.

Article Source: http://www.gambling-articles.org

Learn How to Tie a Tie courtesy of EaglesWings.com Men's Ties and Men's Accesories

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated