Home | Computer | Hardware
This protective cases give dust and fluid protection for computers, thin clients, small form factor PC's so hence the name PC enclosure and computer enclosure, as well in the protective casing a screen and keyboard can be stored. Now this will allow virtually any business to deploy manufacturing facility information hardware on their manufacturing line from the hugh conglomerates through to the little manufacturing businesses this will in turn update up to the minute updates on customer orders and even how much scrap has been created and by which employee. These pc enclosures offer a most cost effective solution as opposed to industrial computers than by and large need particular programs on them and need recurring maintenance to be able to call on the warranty in case of equipent failure, now this is where PC cases have the lead as they give all the defense a computer requires from dust and fluid, even in wet locations such as in food processing facilities. The housing vary in specification from IP56 (dust and splash proof) through to IP65 (washdown with high pressure water jets, these are normally manufactured from food standard stainless steel as this is the major market that requires this type of device. Here are the solutions are as follows: A ordinary keyboard can be used and is positioned on a telescopic ledge so it is only used intermittently, however this hostile setting will still impact on the life of the keyboard, so a affordable solution is to use a sealed keyboard with a track ball built into the keyboard and for around $120 come with either USB or PS2 connections. Or for the wash down areas an IP65 keyboard can be purchased these are produced from stainless steel and also include a trackball but are wholly certified to be washed down with high pressure water jets. IP65 is also equal to NEMA 4X and this is a large market throughout the Britain, Europe and Usa. Now how are the units cooled? This does depend upon the appliance, if the unit is to offer dust fortification and at the same time be splash proof a normal thermostatically controlled cooling fan technology can be used however if the casing is going into a freezer department in a food process facility they are fitted them with thermostatic heaters, the ultimate alternative is for a NEMA 4X PC enclosure to be cooled by an chiller unit or a more affordable decision is a cooling tube that offers the same control of cool air whilst at the same time reducing costs.
Article Source: http://www.gambling-articles.org
Max as developed a protective PC enclosure as well as an LCD enclosure used in outdoor digital signage and factory environments.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
